Exem Foam

Air Polymer-type A Intrauterine Foam


Giskit Pharma B.v.
Human Prescription Drug
NDC 73254-310
Exem Foam also known as Air Polymer-type A Intrauterine Foam is a human prescription drug labeled by 'Giskit Pharma B.v.'. National Drug Code (NDC) number for Exem Foam is 73254-310. This drug is available in dosage form of Kit. The names of the active, medicinal ingredients in Exem Foam drug includes . The currest status of Exem Foam drug is Active.

Drug Information:

Drug NDC: 73254-310
The labeler code and product code segments of the National Drug Code number, separated by a hyphen. Asterisks are no longer used or included within the product code segment to indicate certain configurations of the NDC.
Proprietary Name: Exem Foam
Also known as the trade name. It is the name of the product chosen by the labeler.
Product Type: Human Prescription Drug
Indicates the type of product, such as Human Prescription Drug or Human OTC Drug. This data element corresponds to the “Document Type” of the SPL submission for the listing.
Non Proprietary Name: Air Polymer-type A Intrauterine Foam
Also known as the generic name, this is usually the active ingredient(s) of the product.
Labeler Name: Giskit Pharma B.v.
Name of Company corresponding to the labeler code segment of the ProductNDC.
Dosage Form: Kit
The translation of the DosageForm Code submitted by the firm. There is no standard, but values may include terms like `tablet` or `solution for injection`.The complete list of codes and translations can be found www.fda.gov/edrls under Structured Product Labeling Resources.
Status: Active
FDA does not review and approve unfinished products. Therefore, all products in this file are considered unapproved.
Substance Name:
This is the active ingredient list. Each ingredient name is the preferred term of the UNII code submitted.
Route Details:
The translation of the Route Code submitted by the firm, indicating route of administration. The complete list of codes and translations can be found at www.fda.gov/edrls under Structured Product Labeling Resources.

Marketing Information:

An openfda section: An annotation with additional product identifiers, such as NUII and UPC, of the drug product, if available.
Marketing Category: NDA
Product types are broken down into several potential Marketing Categories, such as New Drug Application (NDA), Abbreviated New Drug Application (ANDA), BLA, OTC Monograph, or Unapproved Drug. One and only one Marketing Category may be chosen for a product, not all marketing categories are available to all product types. Currently, only final marketed product categories are included. The complete list of codes and translations can be found at www.fda.gov/edrls under Structured Product Labeling Resources.
Marketing Start Date: 16 Oct, 2020
This is the date that the labeler indicates was the start of its marketing of the drug product.
Marketing End Date: 22 Dec, 2025
This is the date the product will no longer be available on the market. If a product is no longer being manufactured, in most cases, the FDA recommends firms use the expiration date of the last lot produced as the EndMarketingDate, to reflect the potential for drug product to remain available after manufacturing has ceased. Products that are the subject of ongoing manufacturing will not ordinarily have any EndMarketingDate. Products with a value in the EndMarketingDate will be removed from the NDC Directory when the EndMarketingDate is reached.
Application Number: NDA212279
This corresponds to the NDA, ANDA, or BLA number reported by the labeler for products which have the corresponding Marketing Category designated. If the designated Marketing Category is OTC Monograph Final or OTC Monograph Not Final, then the Application number will be the CFR citation corresponding to the appropriate Monograph (e.g. “part 341”). For unapproved drugs, this field will be null.
Listing Expiration Date: 31 Dec, 2023
This is the date when the listing record will expire if not updated or certified by the firm.

OpenFDA Information:

An openfda section: An annotation with additional product identifiers, such as NUII and UPC, of the drug product, if available.
Manufacturer Name:GISKIT PHARMA B.V.
Name of manufacturer or company that makes this drug product, corresponding to the labeler code segment of the NDC.
Original Packager:Yes
Whether or not the drug has been repackaged for distribution.
UPC:0373254310011
UPC stands for Universal Product Code.
UNII:
Unique Ingredient Identifier, which is a non-proprietary, free, unique, unambiguous, non-semantic, alphanumeric identifier based on a substance’s molecular structure and/or descriptive information.

Packaging Information:

Package NDCDescriptionMarketing Start DateMarketing End DateSample Available
73254-310-011 KIT in 1 CARTON (73254-310-01) * 5 mL in 1 SYRINGE, PLASTIC * 5 mL in 1 SYRINGE, PLASTIC16 Oct, 2020N/ANo
Package NDC number, known as the NDC, identifies the labeler, product, and trade package size. The first segment, the labeler code, is assigned by the FDA. Description tells the size and type of packaging in sentence form. Multilevel packages will have the descriptions concatenated together.

Product Elements:

Exem foam air polymer-type a intrauterine foam syringe a hydroxyethyl celluose, glycerin glycerin glycerin hydroxyethyl cellulose (5500 mpa.s at 2%) hydroxyethyl cellulose (5500 mpa.s at 2%) water syringe b sterile purified water water water

Indications and Usage:

1 indications and usage exem ® foam is indicated for sonohysterosalpingography to assess fallopian tube patency in women with known or suspected infertility. exem ® foam is an ultrasound contrast agent indicated for sonohysterosalpingography to assess fallopian tube patency in women with known or suspected infertility. ( 1 )

Warnings and Cautions:

5 warnings and precautions risk for fetal harm: confirm that the patient has a negative pregnancy test within the 24 hours before exem foam administration and confirm that the patient is in the pre-ovulatory phase of her menstrual cycle (cycle days 6 through 11). ( 4 , 5.1 ) risk for post-procedure gynecologic infections: do not use in contraindicated situations even if the patient is receiving antimicrobial therapy. ( 4 , 5.2 ) 5.1 risk for fetal harm exem foam is contraindicated for use in pregnancy due to the potential risk of fetal harm from an intrauterine procedure. to ensure that the patient is not pregnant prior to exem foam administration, confirm that the patient has a negative pregnancy test within the 24 hours before exem foam administration and confirm that the patient is in the pre-ovulatory phase of her menstrual cycle (cycle days 6 through 11) [see contraindications (4) ]. 5.2 risk for post-procedure gynecologic infections there is a risk of post-procedure gynecological
infections when exem foam is used in sonohysterosalpingography. exem foam is contraindicated for use in patients with known or suspected genital tract inflammation or infections (e.g. including pelvic inflammatory disease (pid) or suspected sexually transmitted disease) even if the patient is receiving antimicrobial therapy. exem foam is contraindicated in patients who have had a gynecologic procedure within the past 30 days (e.g. curettage or conization) due to the risk of post-procedure infections [see contraindications (4) and adverse reactions (6.2) ] .

Dosage and Administration:

2 dosage and administration confirm the patient is not pregnant prior to exem foam administrations ( 2.1 ) recommended dose is 2 ml to 3 ml of exem foam by intrauterine infusion using a 5-fr or larger catheter. dose may be repeated in 2 ml to 3 ml increments, as needed, to achieve visualization of the fallopian tubes. maximum total dose is 10 ml ( 2.2 ) see full prescribing information for preparation and administration instructions. ( 2.3 ) 2.1 important pre-administration information to ensure that the patient is not pregnant prior to exem foam administration [see contraindications (4) and warnings and precautions (5.1) ]: confirm that the patient has a negative pregnancy test within the 24 hours before exem foam administration . confirm the patient is in the pre-ovulatory phase of her menstrual cycle (cycle days 6 through 11). 2.2 recommended dosage the recommended initial dose of exem foam is 2 ml to 3 ml by intrauterine infusion using a 5-fr or larger catheter with luer connection
. the dose may be repeated in increments of 2 ml to 3 ml, as needed, to achieve visualization of the fallopian tubes. maximum total dose is 10 ml. 2.3 preparation and administration the exem foam kit includes the following components: syringe a containing 5 ml clear gel [polymer type a (hydroxyethyl cellulose), glycerin and purified water] syringe b containing 5 ml sterile purified water combifix adapter (coupling device) preparation examine the package and do not use if package has been previously opened or damaged. ensure the kit is at room temperature. handle products following aseptic practices (e.g. sterile gloves). generate foam by mixing syringe a (gel) with syringe b (sterile purified water) included in the package as described in figure 1. infuse foam within 5 minutes of reconstitution. figure 1: reconstitution of exem foam unscrew and discard the caps from each syringe when ready to prepare the foam. push and screw syringe a to one end of the combifix adapter. push and screw syringe b to the other end of the combifix adapter. make sure these syringes are attached tightly to avoid loss of liquid when mixing. push the plunger of one syringe vigorously to transfer, and begin mixing the contents from one syringe to the other syringe. repeat this process at least 10 times. the reconstituted foam is completely milky white (opaque) in color after mixing, transfer all of the foam into one syringe, then disconnect the adapter and other syringe. approximately 10 ml of exem foam is created by mixing syringe a of clear gel with syringe b of sterile purified water. infuse within 5 minutes of mixing to ensure adequate imaging. figure figure administration administer through a 5-fr or larger catheter with luer connection only. if there is resistance when infusing foam use a larger catheter. do not infuse forcefully. infuse 1 ml of foam to confirm proper placement of the catheter tip in the cervix and access to the uterine cavity. slowly infuse 2 ml to 3 ml of the foam at a time to avoid patient discomfort. discard unused portion after use. 2.4 imaging guidance conduct transvaginal ultrasound imaging in accordance with ultrasound manufacturer recommendations. exem foam in the fallopian tube will appear as an echogenic line along the length of the tube on the image. a fallopian tube is classified as patent if exem foam is observed to pass from the tube and spill into the peritoneal cavity. the tube will appear as a thin, bright line. a fallopian tube is classified as occluded if exem foam is not observed to pass from the tube and spill into the peritoneal cavity. as secondary findings, (1) there may be no bright line due to no flow into the fallopian tube, or (2) the tubal lumen may appear distended and contrast flow might be observed only in the intramural or isthmic part of the tube.

Dosage Forms and Strength:

3 dosage forms and strengths intrauterine foam, single-dose kit containing: syringe a: one syringe with 5 ml clear gel [polymer-type a (hydoxyethyl cellulose), glycerin and purified water] syringe b: one syringe with 5 ml sterile purified water one combifix adaptor (coupling device) when prepared as directed exem foam will contain between 10,000 to 127,000 bubbles per ml. intrauterine foam, single-dose kit containing: one syringe with 5 ml clear gel [polymer type a (hydroxyethyl cellulose), glycerin and purified water] one syringe with 5 ml sterile purified water one combifix ® adaptor (coupling device) ( 3 )

Contraindications:

4 contraindications exem foam is contraindicated for use in: pregnancy [see warnings and precautions (5.1) ] . patients with known or suspected lower genital tract inflammation or infection [see warnings and precautions (5.2) ]. patients who have had a gynecologic procedure within the last 30 days [see warnings and precautions (5.2) ]. patients with vaginal bleeding due to the risk of intravasation of exem foam as a result of exposure of the endometrial vessels during bleeding, and due to the potential risk of endometriosis as a result of seeding the peritoneum with endometrial tissue. patients with known or suspected reproductive tract neoplasia due to the risk of peritoneal spread of neoplasm . exem foam is contraindicated in: pregnancy ( 4 ) patients with known or suspected lower genital tract inflammation or infection ( 4 ) patients who have had a gynecologic procedure within the last 30 days ( 4 ) patients with vaginal bleeding ( 4 ) patient with known or suspected reproductive tract neoplasia. ( 4 )

Adverse Reactions:

6 adverse reactions common adverse reactions are: pelvic and abdominal pain; vasovagal reactions and associated symptoms such as nausea and faintness; and post-procedure spotting. ( 6.1 ) to report suspected adverse reactions, contact exem foam inc. at 1-844-963-exem (1-844-963-3936) or fda at 1-800-fda-1088 or www.fda.gov/medwatch. 6.1 clinical trials experience because clinical trials are conducted under widely varying conditions, adverse reaction rates observed in the clinical trials of a drug may not reflect the rates observed in practice. the common adverse reactions associated with exem foam when used as indicated in sonohysterosalpingography are: pelvic and abdominal pain; vasovagal reactions and associated symptoms such as nausea and faintness; and post-procedure spotting. 6.2 postmarketing experience the following adverse reactions have been identified during post-approval use of (air polymer-type a) intrauterine foam outside of the united states. because these reactions are r
eported voluntarily from a population of uncertain size, it is not always possible to reliably estimate their frequency or establish a causal relationship to drug exposure. gynecologic infections: pelvic inflammatory disease, salpingitis, and tubo-ovarian abscess

Use in Specific Population:

8 use in specific populations 8.1 pregnancy risk summary exem foam is contraindicated for use in pregnancy due to the potential risk to the fetus from an intrauterine procedure [see contraindications (4) and warnings and precautions (5.1) ] . there are no available data on the use of exem foam in pregnant women. animal reproduction studies have not been conducted with exem foam. 8.2 lactation risk summary there are no data on the presence of the components used to generate exem foam (glycerin and hydroxyethyl cellulose) in human milk, the effects on the breastfed infant, or the effects on milk production. no adverse effects in breastfed infants are anticipated following maternal administration of exem foam, based on the wide safety margin for glycerol in infants and the expected negligible absorption of hydroxyethyl cellulose [see clinical pharmacology (12.3) ]. the developmental and health benefits of breastfeeding should be considered along with the mother's clinical need for exem fo
am and any potential adverse effects on the breastfed infant from exem foam or from the underlying maternal condition. 8.3 females and males of reproductive potential confirm that the patient has a negative pregnancy test within the 24 hours before exem foam administration [see dosage and administration (2.1) and use in specific populations (8.1) ]. 8.4 pediatric use the safety and effectiveness of exem foam have not been established in pediatric patients.

Use in Pregnancy:

8.1 pregnancy risk summary exem foam is contraindicated for use in pregnancy due to the potential risk to the fetus from an intrauterine procedure [see contraindications (4) and warnings and precautions (5.1) ] . there are no available data on the use of exem foam in pregnant women. animal reproduction studies have not been conducted with exem foam.

Pediatric Use:

8.4 pediatric use the safety and effectiveness of exem foam have not been established in pediatric patients.

Description:

11 description exem foam (air polymer-type a) intrauterine foam, is an ultrasound contrast agent. it is provided to the user for preparation as a single-dose kit containing: 5 ml sterile clear gel [polymer-type a (80.97 mg hydroxyethyl cellulose), 434.80 mg glycerin 85%, and purified water]; with a ph of 6 to 7.5. 5 ml sterile purified water; with a ph of 6 to 7.5. after preparation, exem foam is a milky-white, water-soluble intrauterine foam with an osmolality of approximately 462 mosm and will contain between 10,000 to 127,000 bubbles per ml with a median size of 45.6 to 60.6 micrometers (for bubbles between 20 to 200 micrometers).

Clinical Pharmacology:

12 clinical pharmacology 12.1 mechanism of action exem foam (air polymer-type a) intrauterine foam is formed by mixing the clear gel [polymer-type a (hydroxyethyl cellulose), glycerin, and purified water] with air and sterile purified water, creating an echogenic contrast agent. when visualized with ultrasound, the foam appears echogenic or bright within the fallopian tubes and peritoneal cavity. 12.2 pharmacodynamics exem foam has no known pharmacological activity. 12.3 pharmacokinetics assuming that a full 10 ml of exem foam is used, and all glycerol is absorbed, the normal fasting endogenous glycerol plasma levels would not be affected. no literature data is found on absorption of hydroxyethyl cellulose (hec) from the female reproductive tract and peritoneum. hec is poorly permeable across gi epithelial mucosa; therefore, hec is expected to exhibit very low permeability after administration and to produce negligible hec systemic exposure. the metabolism and excretion of hec are not
known.

Mechanism of Action:

12.1 mechanism of action exem foam (air polymer-type a) intrauterine foam is formed by mixing the clear gel [polymer-type a (hydroxyethyl cellulose), glycerin, and purified water] with air and sterile purified water, creating an echogenic contrast agent. when visualized with ultrasound, the foam appears echogenic or bright within the fallopian tubes and peritoneal cavity.

Pharmacodynamics:

12.2 pharmacodynamics exem foam has no known pharmacological activity.

Pharmacokinetics:

12.3 pharmacokinetics assuming that a full 10 ml of exem foam is used, and all glycerol is absorbed, the normal fasting endogenous glycerol plasma levels would not be affected. no literature data is found on absorption of hydroxyethyl cellulose (hec) from the female reproductive tract and peritoneum. hec is poorly permeable across gi epithelial mucosa; therefore, hec is expected to exhibit very low permeability after administration and to produce negligible hec systemic exposure. the metabolism and excretion of hec are not known.

Nonclinical Toxicology:

13 nonclinical toxicology no nonclinical toxicology studies have been conducted with exem foam. glycerol-hydroxyethyl cellulose (hec) gel is not genotoxic (ames test) or cytotoxic (mouse lymphoma l5178y tk+/- assay).

Clinical Studies:

14 clinical studies clinical studies reported in the scientific literature have assessed the performance of sonohysterosalpingography with exem foam (a technique referred to as hyfosy) for the diagnosis of tubal patency in women with infertility. the studies used laparoscopy with chromotubation as the reference standard. study a compared 2d- and 3d-hyfosy to previous laparoscopy with chromotubation in 50 women (median age 35 years) with at least 12 months of infertility (median duration of infertility 28 months). the women were randomly assigned to either hyfosy with 2d imaging or hyfosy with 3d imaging. the operator performing hyfosy was blinded to the laparoscopy results. for 2d imaging, the proportion of fallopian tubes correctly identified as occluded was 80% and the proportion of tubes that were correctly identified as patent was 92%. for 3d imaging, the proportion of tubes correctly identified as occluded was 98% and the proportion of tubes that were correctly identified as paten
t was 91%. study b compared the diagnostic performance of hyfosy with exem foam using both 2d/3d-sonohysterosalpingography (2d/3d-hyfosy) and 2d/3d-hyfosy with high-definition flow doppler enhancement (2d/3d-hdf-hyfosy), to the reference standard of laparoscopy with chromotubation to establish the patency of the tubes. the study evaluated 132 women (259 fallopian tubes) with history of primary or secondary infertility who were consecutively enrolled over a period of 2 years. the mean age was 32 years and the mean duration of infertility was 2.6 years. the performance of 2d/3d-hyfosy was similar to that of 2d/3d-hdf-hyfosy. the performance estimates in study b were numerically similar to those reported in study a.

How Supplied:

16 how supplied/storage and handling supplied exem foam is supplied as a single-dose kit, ndc 73254-310-01. each kit contains: syringe a: one sterile syringe containing 5 ml of clear gel [polymer-type a (hydroxyethyl cellulose), glycerin and purified water syringe b: one sterile syringe containing 5 ml of sterile purified water one sterile combifix adaptor (coupling device) storage and handling store the kit and components at controlled room temperature between 20° to 25°c (68° to 77°f); [see usp controlled room temperature]; excursions permitted at 15° to 30°c (59° to 86°f). do not store in refrigerator. do not freeze.

Information for Patients:

17 patient counseling information risk for post-procedure gynecologic infections patients should be counseled regarding the risk of post-procedure gynecologic infections. instruct patients to report to their healthcare provider any continued pelvic and abdominal pain, significant vaginal discharge and/or fever post-procedure [see warnings and precautions (5.2) and adverse reactions (6.2) ] . abdominal and pelvic pain inform patients of the potential for transient abdominal and pelvic pain during and after exem foam sonohysterosalpingography [see adverse reactions (6.1) ]

Package Label Principal Display Panel:

Principal display panel - kit carton pdp


Comments/ Reviews:

* Data of this site is collected from www.fda.gov. This page is for informational purposes only. Always consult your physician with any questions you may have regarding a medical condition.