Product Elements:
Ampicillin and sulbactam ampicillin and sulbactam sulbactam sodium sulbactam ampicillin sodium ampicillin
Indications and Usage:
Indications and usage ampicillin and sulbactam for injection, usp is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. skin and skin structure infections caused by beta-lactamase producing strains of staphylococcus aureus , escherichia coli ,* klebsiella spp.* (including k. pneumoniae* ), proteus mirabilis ,* bacteroides fragilis ,* enterobacter spp.,* and acinetobacter calcoaceticus.* note: for information on use in pediatric patients (see precautions-pediatric use and clinical studies sections). intra-abdominal infections caused by beta-lactamase producing strains of escherichia coli , klebsiella spp. (including k. pneumoniae* ), bacteroides spp. (including b. fragilis ), and enterobacter spp.* gynecological infections caused by beta-lactamase producing strains of escherichia coli,* and bacteroides spp.* (including b. fragilis* ). * efficacy for this organism in this organ system was studied in fewer
Read more...than 10 infections. while ampicillin and sulbactam for injection, usp is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with ampicillin and sulbactam for injection, usp due to its ampicillin content. therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to ampicillin and sulbactam for injection, usp should not require the addition of another antibacterial. appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to ampicillin and sulbactam for injection, usp. therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. once the results are known, therapy should be adjusted if appropriate. to reduce the development of drug-resistant bacteria and maintain effectiveness of ampicillin and sulbactam for injection, usp and other antibacterial drugs, ampicillin and sulbactam for injection, usp should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. when culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. in the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.
Warnings:
Warnings hypersensitivity serious and occasionally fatal hypersensitivity (anaphylactic) reactions have been reported in patients on penicillin therapy. these reactions are more apt to occur in individuals with a history of penicillin hypersensitivity and/or hypersensitivity reactions to multiple allergens. there have been reports of individuals with a history of penicillin hypersensitivity who have experienced severe reactions when treated with cephalosporins. before therapy with a penicillin, careful inquiry should be made concerning previous hypersensitivity reactions to penicillins, cephalosporins, and other allergens. if an allergic reaction occurs, ampicillin and sulbactam for injection, usp should be discontinued and the appropriate therapy instituted. hepatotoxicity hepatic dysfunction, including hepatitis and cholestatic jaundice has been associated with the use of ampicillin and sulbactam for injection, usp. hepatic toxicity is usually reversible; however, deaths have been re
Read more...ported. hepatic function should be monitored at regular intervals in patients with hepatic impairment. severe cutaneous adverse reactions ampicillin and sulbactam for injection, usp may cause severe skin reactions, such as toxic epidermal necrolysis (ten), stevens-johnson syndrome (sjs), dermatitis exfoliative, erythema multiforme, and acute generalized exanthematous pustulosis (agep). if patients develop a skin rash they should be monitored closely and ampicillin and sulbactam for injection, usp discontinued if lesions progress (see contraindications and adverse reactions sections). clostridium difficile -associated diarrhea clostridium difficile associated diarrhea (cdad) has been reported with use of nearly all antibacterial agents, including ampicillin and sulbactam for injection, usp, and may range in severity from mild diarrhea to fatal colitis. treatment with antibacterial agents alters the normal flora of the colon leading to overgrowth of c. difficile . c. difficile produces toxins a and b which contribute to the development of cdad. hypertoxin producing strains of c. difficile cause increased morbidity and mortality, as these infections can be refractory to antimicrobial therapy and may require colectomy. cdad must be considered in all patients who present with diarrhea following antibacterial drug use. careful medical history is necessary since cdad has been reported to occur over two months after the administration of antibacterial agents. if cdad is suspected or confirmed, ongoing antibacterial drug use not directed against c. difficile may need to be discontinued. appropriate fluid and electrolyte management, protein supplementation, antibacterial treatment of c. difficile , and surgical evaluation should be instituted as clinically indicated.
Dosage and Administration:
Dosage and administration creatinine clearance (ml/min/1.73m 2 ) ampicillin/sulbactam half-life (hours) recommended ampicillin and sulbactam for injection dosage â¥30 1 1.5â3 g q 6h-q 8h 15â29 5 1.5â3 g q 12h 5â14 9 1.5â3 g q 24h
Contraindications:
Contraindications the use of ampicillin and sulbactam for injection, usp is contraindicated in individuals with a history of serious hypersensitivity reactions (e.g., anaphylaxis or stevens-johnson syndrome) to ampicillin, sulbactam or to other beta-lactam antibacterial drugs (e.g., penicillins and cephalosporins). ampicillin and sulbactam for injection, usp is contraindicated in patients with a previous history of cholestatic jaundice/hepatic dysfunction associated with ampicillin and sulbactam for injection, usp.
Adverse Reactions:
Adverse reactions adult patients ampicillin and sulbactam for injection, usp is generally well tolerated. the following adverse reactions have been reported in clinical trials. local adverse reactions pain at im injection site â 16% pain at iv injection site â 3% thrombophlebitis â 3% phlebitis â 1.2% systemic adverse reactions the most frequently reported adverse reactions were diarrhea in 3% of the patients and rash in less than 2% of the patients. additional systemic reactions reported in less than 1% of the patients were: itching, nausea, vomiting, candidiasis, fatigue, malaise, headache, chest pain, flatulence, abdominal distension, glossitis, urine retention, dysuria, edema, facial swelling, erythema, chills, tightness in throat, substernal pain, epistaxis and mucosal bleeding. pediatric patients: available safety data for pediatric patients treated with ampicillin and sulbactam for injection, usp demonstrate a similar adverse events profile to those observed
Read more...in adult patients. additionally, atypical lymphocytosis has been observed in one pediatric patient receiving ampicillin and sulbactam for injection, usp. adverse laboratory changes adverse laboratory changes without regard to drug relationship that were reported during clinical trials were: hepatic: increased ast (sgot), alt (sgpt), alkaline phosphatase, and ldh. hematologic: decreased hemoglobin, hematocrit, rbc, wbc, neutrophils, lymphocytes, platelets and increased lymphocytes, monocytes, basophils, eosinophils, and platelets. blood chemistry: decreased serum albumin and total proteins. renal: increased bun and creatinine. urinalysis: presence of rbcâs and hyaline casts in urine. postmarketing experience in addition to adverse reactions reported from clinical trials, the following have been identified during post-marketing use of ampicillin sodium/sulbactam sodium or other products containing ampicillin. because they are reported voluntarily from a population of unknown size, estimates of frequency cannot be made. these events have been chosen for inclusion due to a combination of their seriousness, frequency, or potential causal connection to ampicillin sodium/sulbactam sodium. blood and lymphatic system disorders hemolytic anemia, thrombocytopenic purpura, and agranulocytosis have been reported. these reactions are usually reversible on discontinuation of therapy and are believed to be hypersensitivity phenomena. some individuals have developed positive direct coombs tests during treatment with ampicillin and sulbactam for injection, usp, as with other beta-lactam antibacterials. gastrointestinal disorders abdominal pain, cholestatic hepatitis, cholestasis, hyperbilirubinemia, jaundice, abnormal hepatic function, melena, gastritis, stomatitis, dyspepsia, black âhairyâ tongue, and clostridium difficile associated diarrhea (see contraindications and warnings sections). general disorders and administration site conditions injection site reaction immune system disorders serious and fatal hypersensitivity (anaphylactic) reactions (see warnings section), acute myocardial ischemia with or without myocardial infarction may occur as part of an allergic reaction. nervous system disorders convulsion and dizziness renal and urinary disorders tubulointerstitial nephritis respiratory, thoracic and mediastinal disorders dyspnea skin and subcutaneous tissue disorders: toxic epidermal necrolysis, stevens-johnson syndrome, angioedema, acute generalized exanthematous pustulosis (agep), erythema multiforme, exfoliative dermatitis, and urticaria (see contraindications and warnings sections). to report suspected adverse reactions, contact piramal critical care at 1-888-822-8431 or fda at 1-800-fda-1088 or www.fda.gov/medwatch .
Overdosage:
Overdosage neurological adverse reactions, including convulsions, may occur with the attainment of high csf levels of beta-lactams. ampicillin may be removed from circulation by hemodialysis. the molecular weight, degree of protein binding and pharmacokinetics profile of sulbactam suggest that this compound may also be removed by hemodialysis.
Description:
Description ampicillin and sulbactam for injection is an injectable antibacterial combination consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. chemically, it is monosodium (2s, 5r, 6r)-6-[(r)-2-amino-2-phenylacetamido]Â3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. its chemical formula is c 16 h 18 n 3 nao 4 s. the structural formula is: sulbactam sodium is a derivative of the basic penicillin nucleus. chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2s, 5r)-3,3-dimethyl-7-oxo-4-thiaÂ1-azabicyclo [3.2.0] heptane-2-carboxylate 4,4-dioxide. its chemical formula is c 8 h 10 nnao 5 s with a molecular weight of 255.22. the structural formula is: ampicillin and sulbactam for injection, ampicillin sodium/sulbactam sodium parenteral combination, is available as a white to off-white dry powder for reconstitution. ampicillin and sulbactam for injection, usp dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per ml and 125 mg sulbactam per ml. the ph of the solutions is between 8.0 and 10.0. dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per ml) are essentially colorless to pale yellow. the ph of dilute solutions remains the same. ampicillin and sulbactam for injection pharmacy bulk package is a vial containing a sterile preparation of ampicillin sodium and sulbactam sodium for parenteral use that contains many single doses. the pharmacy bulk package is for use in a pharmacy admixture setting; it provides many single doses of ampicillin and sulbactam for injection, usp for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (see directions for use, directions for proper use of pharmacy bulk package ). structure1 structure2
Clinical Pharmacology:
Clinical pharmacology general immediately after completion of a 15-minute intravenous infusion of ampicillin and sulbactam for injection, usp, peak serum concentrations of ampicillin and sulbactam are attained. ampicillin serum levels are similar to those produced by the administration of equivalent amounts of ampicillin alone. peak ampicillin serum levels ranging from 109 to 150 mcg/ml are attained after administration of 2000 mg of ampicillin plus 1000 mg sulbactam and 40 to 71 mcg/ml after administration of 1000 mg ampicillin plus 500 mg sulbactam. the corresponding mean peak serum levels for sulbactam range from 48 to 88 mcg/ml and 21 to 40 mcg/ml, respectively. after an intramuscular injection of 1000 mg ampicillin plus 500 mg sulbactam, peak ampicillin serum levels ranging from 8 to 37 mcg/ml and peak sulbactam serum levels ranging from 6 to 24 mcg/ml are attained. the mean serum half-life of both drugs is approximately 1 hour in healthy volunteers. approximately 75 to 85% of bot
Read more...h ampicillin and sulbactam are excreted unchanged in the urine during the first 8 hours after administration of ampicillin and sulbactam for injection, usp to individuals with normal renal function. somewhat higher and more prolonged serum levels of ampicillin and sulbactam can be achieved with the concurrent administration of probenecid. in patients with impaired renal function the elimination kinetics of ampicillin and sulbactam are similarly affected, hence the ratio of one to the other will remain constant whatever the renal function. the dose of ampicillin and sulbactam for injection, usp in such patients should be administered less frequently in accordance with the usual practice for ampicillin (see dosage and administration section). ampicillin has been found to be approximately 28% reversibly bound to human serum protein and sulbactam approximately 38% reversibly bound. the following average levels of ampicillin and sulbactam were measured in the tissues and fluids listed: table 1 concentration of ampicillin and sulbactam for injection in various body tissues and fluids fluid or tissue dose (grams) ampicillin/sulbactam concentration (mcg/ml or mcg/g) ampicillin/sulbactam peritoneal fluid 0.5/0.5 iv 7/14 blister fluid (cantharides) 0.5/0.5 iv 8/20 tissue fluid 1/0.5 iv 8/4 intestinal mucosa 0.5/0.5 iv 11/18 appendix 2/1 iv 3/40 penetration of both ampicillin and sulbactam into cerebrospinal fluid in the presence of inflamed meninges has been demonstrated after iv administration of ampicillin and sulbactam for injection, usp. the pharmacokinetics of ampicillin and sulbactam in pediatric patients receiving ampicillin and sulbactam for injection, usp are similar to those observed in adults. immediately after a 15-minute infusion of 50 to 75 mg ampicillin and sulbactam for injection, usp/kg body weight, peak serum and plasma concentrations of 82 to 446 mcg ampicillin/ml and 44 to 203 mcg sulbactam/ml were obtained. mean half-life values were approximately 1 hour.
Clinical Studies:
Clinical studies skin and skin structure infections in pediatric patients: data from a controlled clinical trial conducted in pediatric patients provided evidence supporting the safety and efficacy of ampicillin and sulbactam for injection, usp for the treatment of skin and skin structure infections. of 99 pediatric patients evaluable for clinical efficacy, 60 patients received a regimen containing intravenous ampicillin and sulbactam for injection, usp, and 39 patients received a regimen containing intravenous cefuroxime. this trial demonstrated similar outcomes (assessed at an appropriate interval after discontinuation of all antimicrobial therapy) for ampicillin and sulbactam for injection, usp - and cefuroxime-treated patients: table 2 therapeutic regimen clinical success clinical failure ampicillin and sulbactam for injection, usp 51/60 (85%) 9/60 (15%) cefuroxime 34/39 (87%) 5/39 (13%) most patients received a course of oral antimicrobials following initial treatment with intrave
Read more...nous administration of parenteral antimicrobials. the study protocol required that the following three criteria be met prior to transition from intravenous to oral antimicrobial therapy: (1) receipt of a minimum of 72 hours of intravenous therapy; (2) no documented fever for prior 24 hours; and (3) improvement or resolution of the signs and symptoms of infection. the choice of oral antimicrobial agent used in this trial was determined by susceptibility testing of the original pathogen, if isolated, to oral agents available. the course of oral antimicrobial therapy should not routinely exceed 14 days.
How Supplied:
How supplied ampicillin and sulbactam for injection pharmacy bulk package is suspected as follows: ndc ampicillin and sulbactam for injection package factor 66794-208-15 15 grams per pharmacy bulk package bottle (10 grams ampicillin as the sodium salt plus 5 grams sulbactam as the sodium salt) 1 bottle per carton ampicillin and sulbactam for injection is a sterile white to off-white dry powder supplied in glass vials. ampicillin and sulbactam for injection is also available as follows: ndc ampicillin and sulbactam for injection package factor 66794-206-02 66794-206-41 1.5 grams per vial (1 gram ampicillin as the sodium salt plus 0.5 gram sulbactam as the sodium salt) 10 vials per carton 66794-207-02 66794-207-41 3 grams per vial (2 gram ampicillin as the sodium salt plus 1 gram sulbactam as the sodium salt) 10 vials per carton storage conditions prior to reconstitution store at 20Ë to 25Ëc (68Ë to 77Ëf); excursions permitted between 15Ë and 30Ë c (59Ë and 86Ëf).
Read more... [see usp controlled room temperature.] sterile, nonpyrogenic, preservative-free. the container closure is not made with natural rubber latex. brands listed are the trademarks of their respective owners. manifactured for: piramal critical care bethlehem, pa 18017, usa made in india ©2022 piramal critical care revised: october 2022
Package Label Principal Display Panel:
Label ampicillin and sulbactam for injection, usp 15grams*per pharmacy bulk package ndc 66794-208-15 for intravenous use carton ampicillin and sulbactam for injection, usp 15grams*per pharmacy bulk package ndc 66794-208-15 for intravenous use amp 15gm label amp 15gm carton