Dextrose

Dextrose Monohydrate


Icu Medical Inc.
Human Prescription Drug
NDC 0990-7938
Dextrose also known as Dextrose Monohydrate is a human prescription drug labeled by 'Icu Medical Inc.'. National Drug Code (NDC) number for Dextrose is 0990-7938. This drug is available in dosage form of Injection, Solution, Concentrate. The names of the active, medicinal ingredients in Dextrose drug includes Dextrose Monohydrate - 10 g/100mL . The currest status of Dextrose drug is Active.

Drug Information:

Drug NDC: 0990-7938
The labeler code and product code segments of the National Drug Code number, separated by a hyphen. Asterisks are no longer used or included within the product code segment to indicate certain configurations of the NDC.
Proprietary Name: Dextrose
Also known as the trade name. It is the name of the product chosen by the labeler.
Product Type: Human Prescription Drug
Indicates the type of product, such as Human Prescription Drug or Human OTC Drug. This data element corresponds to the “Document Type” of the SPL submission for the listing.
Non Proprietary Name: Dextrose Monohydrate
Also known as the generic name, this is usually the active ingredient(s) of the product.
Labeler Name: Icu Medical Inc.
Name of Company corresponding to the labeler code segment of the ProductNDC.
Dosage Form: Injection, Solution, Concentrate
The translation of the DosageForm Code submitted by the firm. There is no standard, but values may include terms like `tablet` or `solution for injection`.The complete list of codes and translations can be found www.fda.gov/edrls under Structured Product Labeling Resources.
Status: Active
FDA does not review and approve unfinished products. Therefore, all products in this file are considered unapproved.
Substance Name:DEXTROSE MONOHYDRATE - 10 g/100mL
This is the active ingredient list. Each ingredient name is the preferred term of the UNII code submitted.
Route Details:INTRAVENOUS
The translation of the Route Code submitted by the firm, indicating route of administration. The complete list of codes and translations can be found at www.fda.gov/edrls under Structured Product Labeling Resources.

Marketing Information:

An openfda section: An annotation with additional product identifiers, such as NUII and UPC, of the drug product, if available.
Marketing Category: NDA
Product types are broken down into several potential Marketing Categories, such as New Drug Application (NDA), Abbreviated New Drug Application (ANDA), BLA, OTC Monograph, or Unapproved Drug. One and only one Marketing Category may be chosen for a product, not all marketing categories are available to all product types. Currently, only final marketed product categories are included. The complete list of codes and translations can be found at www.fda.gov/edrls under Structured Product Labeling Resources.
Marketing Start Date: 20 Nov, 2019
This is the date that the labeler indicates was the start of its marketing of the drug product.
Marketing End Date: 21 Jun, 2026
This is the date the product will no longer be available on the market. If a product is no longer being manufactured, in most cases, the FDA recommends firms use the expiration date of the last lot produced as the EndMarketingDate, to reflect the potential for drug product to remain available after manufacturing has ceased. Products that are the subject of ongoing manufacturing will not ordinarily have any EndMarketingDate. Products with a value in the EndMarketingDate will be removed from the NDC Directory when the EndMarketingDate is reached.
Application Number: NDA018080
This corresponds to the NDA, ANDA, or BLA number reported by the labeler for products which have the corresponding Marketing Category designated. If the designated Marketing Category is OTC Monograph Final or OTC Monograph Not Final, then the Application number will be the CFR citation corresponding to the appropriate Monograph (e.g. “part 341”). For unapproved drugs, this field will be null.
Listing Expiration Date: 31 Dec, 2023
This is the date when the listing record will expire if not updated or certified by the firm.

OpenFDA Information:

An openfda section: An annotation with additional product identifiers, such as NUII and UPC, of the drug product, if available.
Manufacturer Name:ICU Medical Inc.
Name of manufacturer or company that makes this drug product, corresponding to the labeler code segment of the NDC.
RxCUI:1795477
The RxNorm Concept Unique Identifier. RxCUI is a unique number that describes a semantic concept about the drug product, including its ingredients, strength, and dose forms.
Original Packager:Yes
Whether or not the drug has been repackaged for distribution.
UNII:LX22YL083G
Unique Ingredient Identifier, which is a non-proprietary, free, unique, unambiguous, non-semantic, alphanumeric identifier based on a substance’s molecular structure and/or descriptive information.

Packaging Information:

Package NDCDescriptionMarketing Start DateMarketing End DateSample Available
0990-7938-1912 POUCH in 1 CASE (0990-7938-19) / 1 BAG in 1 POUCH / 500 mL in 1 BAG20 Nov, 2019N/ANo
Package NDC number, known as the NDC, identifies the labeler, product, and trade package size. The first segment, the labeler code, is assigned by the FDA. Description tells the size and type of packaging in sentence form. Multilevel packages will have the descriptions concatenated together.

Product Elements:

Dextrose dextrose monohydrate dextrose monohydrate anhydrous dextrose water

Drug Interactions:

Drug interaction additives may be incompatible. consult with pharmacist, if available. when introducing additives, use aseptic technique, mix thoroughly and do not store. some opacity of the plastic due to moisture absorption during sterilization process may be observed. this is normal and does not affect the solution quality or safety. the opacity will diminish gradually. warning: do not use flexible container in series connections.

Indications and Usage:

Indications and usage 10% dextrose injection, usp (concentrated dextrose in water) in a partial-fill container is indicated for admixture with amino acids or dilution with other compatible iv fluids to provide a 5% final dextrose concentration for intravenous infusion in patients whose condition requires parenteral nutrition.

Warnings:

Warnings concentrated dextrose in water should be administered only after suitable dilution. hypertonic dextrose solutions should be given slowly. significant hyperglycemia and possible hyperosmolar syndrome may result from too rapid administration. the physician should be aware of the symptoms of hyperosmolar syndrome, such as mental confusion and loss of consciousness, especially in patients with chronic uremia and those with known carbohydrate intolerance. the intravenous administration of this solution can cause fluid and/or solute overloading resulting in dilution of serum electrolyte concentrations, overhydration, congested states or pulmonary edema. warning : this product contains aluminum that may be toxic. aluminum may reach toxic levels with prolonged parenteral administration if kidney function is impaired. premature neonates are particularly at risk because their kidneys are immature, and they require large amounts of calcium and phosphate solutions, which contain aluminum.
research indicates that patients with impaired kidney function, including premature neonates, who receive parenteral levels of aluminum at greater than 4 to 5 mcg/kg/day accumulate aluminum at levels associated with central nervous system and bone toxicity. tissue loading may occur at even lower rates of administration. for peripheral vein administration hypertonic dextrose solutions (above 5% concentration) should be given slowly, preferably through a small bore needle into a large vein, to minimize venous irritation. for central venous administration concentrated dextrose should be administered via central vein after appropriate admixture or dilution when required.

Dosage and Administration:

Dosage and administration concentrated dextrose in water is administered by slow intravenous infusion (a) after admixture with amino acid solutions or (b) after dilution with other compatible iv fluids. dosage should be adjusted to meet the requirements of each individual patient. the maximum rate at which dextrose can be infused without producing glycosuria is 0.5 g/kg of body weight /hr. about 95% of the dextrose is retained when infused at a rate of 0.8 g/kg/hr. clinical evaluation and periodic laboratory determinations are necessary to monitor changes in fluid balance, electrolyte concentrations, and acid-base balance during prolonged parenteral therapy or whenever the condition of the patient warrants such evaluation. a list of nutritional admixture values is appended. parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit. (see precautions ). drug interaction additives may be i
ncompatible. consult with pharmacist, if available. when introducing additives, use aseptic technique, mix thoroughly and do not store. some opacity of the plastic due to moisture absorption during sterilization process may be observed. this is normal and does not affect the solution quality or safety. the opacity will diminish gradually. warning: do not use flexible container in series connections.

Contraindications:

Contraindications a concentrated dextrose solution should not be used when intracranial or intraspinal hemorrhage is present nor in the presence of delirium tremens if the patient is already dehydrated. dextrose injection, usp without electrolytes should not be administered simultaneously with blood through the same infusion set because of the possibility that pseudoagglutination of red cells may occur.

Adverse Reactions:

Adverse reactions hyperosmolar syndrome, resulting from excessively rapid administration of concentrated dextrose may cause hypovolemia, dehydration, mental confusion and/or loss of consciousness. reactions which may occur because of the solution or the technique of administration include febrile response, infection at the site of injection, venous thrombosis or phlebitis extending from the site of injection, extravasation and hypervolemia. if an adverse reaction does occur, discontinue the infusion, evaluate the patient, institute appropriate therapeutic countermeasures and save the remainder of the fluid for examination if deemed necessary.

Drug Interactions:

Drug interaction additives may be incompatible. consult with pharmacist, if available. when introducing additives, use aseptic technique, mix thoroughly and do not store. some opacity of the plastic due to moisture absorption during sterilization process may be observed. this is normal and does not affect the solution quality or safety. the opacity will diminish gradually. warning: do not use flexible container in series connections.

Use in Pregnancy:

Pregnancy category c. animal reproduction studies have not been conducted with dextrose. it is also not known whether dextrose can cause fetal harm when administered to a pregnant woman or can affect reproduction capacity. dextrose should be given to a pregnant woman only if clearly needed. this product contains no more than 25 mcg/l of aluminum.

Overdosage:

Overdosage in the event of overhydration or solute overload during therapy, re-evaluate the patient and institute appropriate corrective measures. (see warnings and precautions ).

Description:

Description 10% dextrose injection, usp (concentrated dextrose in water) is a sterile, nonpyrogenic, hypertonic solution of dextrose, usp in water for injection for intravenous administration after appropriate admixture or dilution. 10% dextrose injection, usp is provided as a 500 ml volume in a 1000 ml partial-fill container. the container is designed to facilitate admixture or dilution. see table under how supplied for summary of content and characteristics of this concentrated solution. the solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only for use as a single-dose injection following admixture or dilution. the flexible plastic container is fabricated from a specially formulated polyvinyl chloride. water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. exposure to temperatures above 25°c/77°f during transport and storage will lead to minor losses in moisture content. higher temperatures lead to greater losses. it is unlikely that these minor losses will lead to clinically significant changes within the expiration period. dextrose injection, usp is a parenteral fluid and nutrient replenisher. dextrose injection, usp is chemically designated d-glucose monohydrate (c 6 h 12 o 6 • h 2 o), a hexose sugar freely soluble in water. it has the following structural formula: water for injection, usp is chemically designated h 2 o. structural formula dextrose

Clinical Pharmacology:

Clinical pharmacology when administered intravenously, solutions containing carbohydrate in the form of dextrose restore blood glucose levels and provide calories. carbohydrate in the form of dextrose may aid in minimizing liver glycogen depletion and exerts a protein sparing action. dextrose injection, usp undergoes oxidation to carbon dioxide and water. water is an essential constituent of all body tissues and accounts for approximately 70% of total body weight. average normal adult daily requirement ranges from two to three liters (1.0 to 1.5 liters each for insensible water loss by perspiration and urine production, respectively). water balance is maintained by various regulatory mechanisms. water distribution depends primarily on the concentration of electrolytes in the body compartments, and sodium (na + ) plays a major role in maintaining physiologic equilibrium.

How Supplied:

How supplied 10% dextrose injection, usp is supplied in single-dose, partial-fill, flexible containers as follows: a 500 ml volume in a 1000 ml container. see the following table. concentrated dextrose in water content and characteristics ndc no. % conc. fill volume (ml) total grams of dextrose hydrous per container kcal caloric value calculated on the basis of 3.4 kcal/g of dextrose, hydrous. /100 ml (per container) mosmol/liter (calc.) ph (range) 0409-7938-19 10 500 50 34 (170) 505 4.3 (3.2 to 6.5) 0990-7938-19 10 500 50 34 (170) 505 4.3 (3.2 to 6.5) icu medical is transitioning ndc codes from the "0409" to a "0990" labeler code. both ndc codes are expected to be in the market for a period of time. nutritional admixture values equal volumes of 10% dextrose injection, usp and aminosyn™ 7% provide the following: dextrose pre-dilution concentration admixture non-protein kcal/g n admixture non-protein kcal/liter admixture g n/liter admixture dextrose concentration 10% 31 170 5.5 5%
store at 20 to 25°c (68 to 77°f). [see usp controlled room temperature.] protect from freezing. revised: november, 2018 en-4694 icu medical, inc., lake forest, illinois, 60045, usa

Package Label Principal Display Panel:

Principal display panel - 500 ml bag label 500 ml ndc 0990-7938-19 in 1000 ml partial-fill container 10% dextrose injection, usp each 100 ml contains dextrose, hydrous 10 g in water for injection. 505 mosmol/liter (calc.) ph 4.3 (3.2 to 6.5) caution: hypertonic. administer only after dilution. dextrose solutions without salts should not be used in blood transfusions because of possible rouleau formation. additives may be incompatible. consult with pharmacist, if available. when introducing additives, use aseptic technique, mix thoroughly and do not store. single-dose container. for i.v. use. usual dosage: see insert. sterile, nonpyrogenic. use only if solution is clear and container is undamaged. must not be used in series connections. rx only im-4435 3 v contains dehp icumedical icu medical, inc., lake forest, illinois, 60045 usa principal display panel - 500 ml bag label

Principal display panel - 500 ml bag pouch label to open — tear at notch the overwrap is a moisture and oxygen barrier. do not remove unit from overwrap until ready for use. visually inspect overwrap for tears or holes. discard unit if overwrap is damaged. use unit promptly when pouch is opened. store at 20 to 25°c (68 to 77°f). [see usp controlled room temperature.] protect from freezing. see insert. after removing the overwrap, check for minute leaks by squeezing container firmly. if leaks are found, discard solution as sterility may be impaired. rx only wr-0559 icu medical, inc., lake forest, illinois, 60045 usa icumedical principal display panel - 500 ml bag pouch label


Comments/ Reviews:

* Data of this site is collected from www.fda.gov. This page is for informational purposes only. Always consult your physician with any questions you may have regarding a medical condition.