Product Elements:
Potassium chloride in dextrose and sodium chloride dextrose monohydrate, sodium chloride, and potassium chloride dextrose monohydrate anhydrous dextrose sodium chloride sodium cation chloride ion potassium chloride potassium cation chloride ion water hydrochloric acid potassium chloride in dextrose and sodium chloride dextrose monohydrate, sodium chloride, and potassium chloride dextrose monohydrate anhydrous dextrose sodium chloride sodium cation chloride ion potassium chloride potassium cation chloride ion water hydrochloric acid potassium chloride in dextrose and sodium chloride dextrose monohydrate, sodium chloride, and potassium chloride dextrose monohydrate anhydrous dextrose sodium chloride sodium cation chloride ion potassium chloride potassium cation chloride ion water hydrochloric acid potassium chloride in dextrose and sodium chloride dextrose monohydrate, sodium chloride, and potassium chloride dextrose monohydrate anhydrous dextrose sodium chloride sodium cation chloride ion potassium chloride potassium cation chloride ion water hydrochloric acid potassium chloride in dextrose and sodium chloride dextrose monohydrate, sodium chloride, and potassium chloride dextrose monohydrate anhydrous dextrose sodium chloride sodium cation chloride ion potassium chloride potassium cation chloride ion water hydrochloric acid potassium chloride in dextrose and sodium chloride dextrose monohydrate, sodium chloride, and potassium chloride dextrose monohydrate anhydrous dextrose sodium chloride sodium cation chloride ion potassium chloride potassium cation chloride ion water hydrochloric acid potassium chloride in dextrose and sodium chloride dextrose monohydrate, sodium chloride, and potassium chloride dextrose monohydrate anhydrous dextrose sodium chloride sodium cation chloride ion potassium chloride potassium cation chloride ion water hydrochloric acid
Drug Interactions:
Drug interactions additives may be incompatible. consult with pharmacist, if available. when introducing additives, use aseptic technique, mix thoroughly and do not store. parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit. see precautions .
Indications and Usage:
Indications and usage these solutions are indicated in patients requiring parenteral administration of potassium chloride with minimal carbohydrate calories and sodium chloride.
Warnings:
Warnings solutions which contain potassium ions should be used with great care, if at all, in patients with hyperkalemia, severe renal failure and in conditions in which potassium retention is present. to avoid potassium intoxication, do not infuse these solutions rapidly. in patients with severe renal insufficiency or adrenal insufficiency, administration of potassium chloride may cause potassium intoxication. solutions containing sodium ions should be used with great care, if at all, in patients with congestive heart failure, severe renal insufficiency and in clinical states in which there exists edema with sodium retention. in patients with diminished renal function, administration of solutions containing sodium or potassium ions may result in sodium or potassium retention. the intravenous administration of these solutions can cause fluid and/or solute overloading resulting in dilution of serum electrolyte concentrations, overhydration, congested states or pulmonary edema. the risk
Read more...of dilutional states is inversely proportional to the electrolyte concentration of administered parenteral solutions. the risk of solute overload causing congested states with peripheral and pulmonary edema is directly proportional to the electrolyte concentrations of such solutions.
Dosage and Administration:
Dosage and administration these solutions should be administered only by intravenous infusion and as directed by the physician. the dose and rate of injection are dependent upon the age, weight and clinical condition of the patient. if the serum potassium level is greater than 2.5 meq/liter, potassium should be given at a rate not to exceed 10 meq/hour in a concentration less than 30 meq/liter. somewhat faster rates and greater concentrations (usually up to 40 meq/liter) of potassium may be indicated in patients with more severe potassium deficiency. the total 24-hour dose should not generally exceed 200 meq of potassium. as reported in the literature, the dosage and constant infusion rate of intravenous dextrose must be selected with caution in pediatric patients, particularly neonates and low birth weight infants, because of the increased risk of hyperglycemia/hypoglycemia. drug interactions additives may be incompatible. consult with pharmacist, if available. when introducing additi
Read more...ves, use aseptic technique, mix thoroughly and do not store. parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit. see precautions .
Contraindications:
Contraindications solutions containing potassium chloride are contraindicated in diseases where high potassium levels may be encountered.
Adverse Reactions:
Adverse reactions reactions which may occur because of the solutions or technique of administration include febrile response, infection at the site of injection, venous thrombosis or phlebitis extending from the site of injection, extravasation and hypervolemia. if an adverse reaction does occur, discontinue the infusion, evaluate the patient, institute appropriate therapeutic countermeasures and save the remainder of the fluid for examination if deemed necessary. nausea, vomiting, abdominal pain and diarrhea have been reported with potassium therapy. the signs and symptoms of potassium intoxication include paresthesias of the extremities, flaccid paralysis, listlessness, mental confusion, weakness and heaviness of the legs, hypotension, cardiac arrhythmias, heart block, electrocardiographic abnormalities such as disappearance of p waves, spreading and slurring of the qrs complex with development of a biphasic curve and cardiac arrest. potassium-containing solutions are intrinsically i
Read more...rritating to tissues. therefore, extreme care should be taken to avoid perivascular infiltration. local tissue necrosis and subsequent sloughing may result if extravasation occurs. chemical phlebitis and venospasm have also been reported. should perivascular infiltration occur, i.v. administration at that site should be discontinued at once. local infiltration of the affected area with procaine hydrochloride, 1%, to which hyaluronidase may be added, will often reduce venospasm and dilute the potassium remaining in the tissues locally. local application of heat may also be helpful.
Drug Interactions:
Drug interactions additives may be incompatible. consult with pharmacist, if available. when introducing additives, use aseptic technique, mix thoroughly and do not store. parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit. see precautions .
Use in Pregnancy:
Pregnancy category c. animal reproduction studies have not been conducted with dextrose, potassium chloride or sodium chloride. it is also not known whether dextrose, potassium chloride or sodium chloride can cause fetal harm when administered to a pregnant woman or can affect reproduction capacity. dextrose, potassium chloride or sodium chloride should be given to a pregnant woman only if clearly needed.
Pediatric Use:
Pediatric use: the safety and effectiveness in the pediatric population are based on the similarity of the clinical conditions of the pediatric and adult populations. in neonates or very small infants the volume of fluid may affect fluid and electrolyte balance. frequent monitoring of serum glucose concentrations is required when dextrose is prescribed to pediatric patients, particularly neonates and low birth weight infants. in very low birth weight infants, excessive or rapid administration of dextrose injection may result in increased serum osmolality and possible intracerebral hemorrhage.
Geriatric Use:
Geriatric use: an evaluation of current literature revealed no clinical experience identifying differences in response between elderly and younger patients. in general, dose selection for an elderly patient should be cautious, usually starting at the low end of the dosing range, reflecting the greater frequency of decreased hepatic, renal, or cardiac function, and of concomitant disease or other drug therapy. sodium and potassium ions are known to be substantially excreted by the kidney, and the risk of toxic reactions may be greater in patients with impaired renal function. because elderly patients are more likely to have decreased renal function, care should be taken in dose selection, and it may be useful to monitor renal function.
Overdosage:
Overdosage in the event of potassium overdosage, discontinue the infusion immediately and institute intensive corrective therapy to reduce serum potassium levels. see warnings and precautions .
Description:
Description intravenous solutions with potassium chloride (i.v. solutions with kcl) are sterile and nonpyrogenic solutions in water for injection. they are for administration by intravenous infusion only. see tables for summary of content and characteristics of these solutions. the solutions contain no bacteriostat, antimicrobial agent or added buffer and each is intended only for use as a single-dose injection. when smaller doses are required the unused portion should be discarded. these solutions are parenteral fluid, nutrient and/or electrolyte replenishers. dextrose, usp is chemically designated d-glucose, monohydrate (c 6 h 12 o 6 ⢠h 2 o), a hexose sugar freely soluble in water. it has the following structural formula: potassium chloride, usp is chemically designated kcl, a white granular powder freely soluble in water. sodium chloride, usp is chemically designated nacl, a white crystalline powder freely soluble in water. water for injection, usp is chemically designated h 2 o. the flexible plastic container is fabricated from a specially formulated polyvinylchloride. water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. exposure to temperatures above 25°c/77°f during transport and storage will lead to minor losses in the moisture content. higher temperatures lead to greater losses. it is unlikely that these minor losses will lead to clinically significant changes within the expiration period. structural formula dextrose
Clinical Pharmacology:
Clinical pharmacology when administered intravenously, these solutions provide a source of water and potassium chloride with carbohydrate (dextrose) and sodium chloride. see how supplied section for specific concentrations of these various solutions. solutions containing carbohydrate in the form of dextrose restore blood glucose levels and provide calories. carbohydrate in the form of dextrose may aid in minimizing liver glycogen depletion and exerts a protein-sparing action. dextrose injected parenterally undergoes oxidation to carbon dioxide and water. intravenous solutions containing potassium chloride are particularly intended to provide needed potassium cation (k + ). potassium is the chief cation of body cells (160 meq/liter of intracellular water). it is found in low concentration in plasma and extracellular fluids (3.5 to 5.0 meq/liter in a healthy adult). potassium plays an important role in electrolyte balance. normally about 80 to 90% of the potassium intake is excreted in t
Read more...he urine; the remainder in the stools and to a small extent, in the perspiration. the kidney does not conserve potassium well so that during fasting or in patients on a potassium-free diet, potassium loss from the body continues resulting in potassium depletion. a deficiency of either potassium or chloride will lead to a deficit of the other. sodium chloride in water dissociates to provide sodium (na + ) and chloride (cl â ) ions. sodium (na + ) is the principal cation of the extracellular fluid and plays a large part in the therapy of fluid and electrolyte disturbances. chloride (cl â ) has an integral role in buffering action when oxygen and carbon dioxide exchange occurs in the red blood cells. the distribution and excretion of sodium (na + ) and chloride (cl â ) are largely under the control of the kidney which maintains a balance between intake and output. water is an essential constituent of all body tissues and accounts for approximately 70% of total body weight. average normal adult daily requirement ranges from two to three liters (1.0 to 1.5 liters each for insensible water loss by perspiration and urine production). water balance is maintained by various regulatory mechanisms. water distribution depends primarily on the concentration of electrolytes in the body compartments and sodium (na + ) plays a major role in maintaining physiologic equilibrium.
Carcinogenesis and Mutagenesis and Impairment of Fertility:
Carcinogenesis, mutagenesis, impairment of fertility: studies with solutions from flexible plastic containers have not been performed to evaluate carcinogenic potential, mutagenic potential or effects on fertility.
How Supplied:
How supplied intravenous solutions with potassium chloride (i.v. solution with kcl) are supplied in single-dose flexible plastic containers. see tables: table 1 potassium chloride in 5% dextrose and 0.225% sodium chloride inj., usp composition (g/l) approx. ionic concentrations (meq/l) meq potassium size (ml) dextrose, hydrous sodium chloride potassium chloride calculated osmolarity (mosmol/l) ph sodium (na+) potassium (k+) chloride (clâ) approximate kcal/l ndc no. 20 meq 1000 50 2.25 1.49 370 4.2 (3.5 to 6.5) 38.5 20 58.5 170 0409-7901-09 1 20 meq 1000 50 2.25 1.49 370 4.2 (3.5 to 6.5) 38.5 20 58.5 170 0990-7901-09 1 icu medical is transitioning ndc codes from the "0409" to a "0990" labeler code. both ndc codes are expected to be in the market for a period of time. table 2 potassium chloride in 5% dextrose and 0.45% sodium chloride inj., usp composition (g/l) approx. ionic concentrations (meq/l) meq potassium size (ml) dextrose, hydrous sodium chloride potassium chloride calculat
Read more...ed osmolarity (mosmol/l) ph sodium (na+) potassium (k+) chloride (clâ) approximate kcal/l ndc no. 10 meq 1000 50 4.5 0.745 426 4.2 (3.5 to 6.5) 77 10 87 170 0409-7993-09 2 10 meq 1000 50 4.5 0.745 426 4.2 (3.5 to 6.5) 77 10 87 170 0990-7993-09 1,2 10 meq 500 50 4.5 1.49 447 4.2 (3.5 to 6.5) 77 20 97 170 0409-7902-03 2 10 meq 500 50 4.5 1.49 447 4.2 (3.5 to 6.5) 77 20 97 170 0990-7902-03 1,2 20 meq 1000 50 4.5 1.49 447 4.2 (3.5 to 6.5) 77 20 97 170 0409-7902-09 1,2 20 meq 1000 50 4.5 1.49 447 4.2 (3.5 to 6.5) 77 20 97 170 0990-7902-09 1,2 30 meq 1000 50 4.5 2.24 467 4.2 (3.5 to 6.5) 77 30 107 170 0409-7903-09 1 30 meq 1000 50 4.5 2.24 467 4.2 (3.5 to 6.5) 77 30 107 170 0990-7903-09 1 40 meq 1000 50 4.5 2.98 487 4.2 (3.5 to 6.5) 77 40 117 170 0409-7904-09 1,2 40 meq 1000 50 4.5 2.98 487 4.2 (3.5 to 6.5) 77 40 117 170 0990-7904-09 1,2 icu medical is transitioning ndc codes from the "0409" to a "0990" labeler code. both ndc codes are expected to be in the market for a period of time. table 3 potassium chloride in 5% dextrose and 0.9% sodium chloride inj., usp composition (g/l) approx. ionic concentrations (meq/l) meq potassium size (ml) dextrose, hydrous sodium chloride potassium chloride calculated osmolarity (mosmol/l) ph sodium (na+) potassium (k+) chloride (clâ) approximate kcal/l ndc no. 20 meq 1000 50 9 1.49 600 4.2 (3.5 to 6.5) 154 20 174 170 0409-7107-09 2 20 meq 1000 50 9 1.49 600 4.2 (3.5 to 6.5) 154 20 174 170 0990-7107-09 1,2 40 meq 1000 50 9 2.98 640 4.2 (3.5 to 6.5) 154 40 194 170 0409-7109-09 2 40 meq 1000 50 9 2.98 640 4.2 (3.5 to 6.5) 154 40 194 170 0990-7109-09 1,2 icu medical is transitioning ndc codes from the "0409" to a "0990" labeler code. both ndc codes are expected to be in the market for a period of time. may contain hcl for ph adjustment. store at 20 to 25°c (68 to 77°f). [see usp controlled room temperature.] protect from freezing. revised: december, 2020 1 manufactured by icu medical, inc., lake forest, illinois, 60045, usa 2 manufactured for icu medical, inc., lake forest, illinois, 60045, usa ifu0000280
Package Label Principal Display Panel:
Principal display panel - 1000 ml bag label - imp0000044 20 meq potassium 1000 ml ndc 0990-7107-09 20 meq potassium chloride in 5% dextrose and 0.9% sodium chloride injection, usp each 100 ml contains potassium chloride 149 mg; sodium chloride 900 mg; dextrose, hydrous 5 g in water for injection. may contain hcl for ph adjustment. electrolytes per 1000 ml (not including ions for ph adjustment): potassium 20 meq; sodium 154 meq; chloride 174 meq. 600 mosmol/liter (calc.) ph 4.2 (3.5 to 6.5) additives may be incompatible. consult with pharmacist, if available. when introducing additives, use aseptic technique, mix thoroughly and do not store. single-dose container. for i.v. use. usual dosage: see insert. sterile, nonpyrogenic. use only if solution is clear and container is undamaged. must not be used in series connections. rx only 3 v contains dehp imp0000044 icu medical, inc., lake forest, illinois, 60045, usa icumedical principal display panel - 1000 ml bag label - imp0000044
Principal display panel - 1000 ml bag label - imp0000045 40 meq potassium 1000 ml ndc 0990-7109-09 40 meq potassium chloride in 5% dextrose and 0.9% sodium chloride injection, usp each 100 ml contains potassium chloride 298 mg; sodium chloride 900 mg; dextrose, hydrous 5 g in water for injection. may contain hcl for ph adjustment. electrolytes per 1000 ml (not including ions for ph adjustment): potassium 40 meq; sodium 154 meq; chloride 194 meq. 640 mosmol/liter (calc.) ph 4.2 (3.5 to 6.5) additives may be incompatible. consult with pharmacist, if available. when introducing additives, use aseptic technique, mix thoroughly and do not store. single-dose container. for i.v. use. usual dosage: see insert. sterile, nonpyrogenic. use only if solution is clear and container is undamaged. must not be used in series connections. rx only 3 v contains dehp imp0000045 icu medical, inc., lake forest, illinois, 60045, usa icumedical principal display panel - 1000 ml bag label - imp0000045
Principal display panel - 1000 ml bag label - im-4420 30 meq potassium 1000 ml ndc 0990-7903-09 30 meq potassium chloride in 5% dextrose and 0.45% sodium chloride injection, usp each 100 ml contains potassium chloride 224 mg; sodium chloride 450 mg; dextrose, hydrous 5 g in water for injection. may contain hcl for ph adjustment. electrolytes per 1000 ml (not including ions for ph adjustment): potassium 30 meq; sodium 77 meq; chloride 107 meq. 467 mosmol/liter (calc.) ph 4.2 (3.5 to 6.5) additives may be incompatible. consult with pharmacist, if available. when introducing additives, use aseptic technique, mix thoroughly and do not store. single-dose container. for i.v. use. usual dosage: see insert. sterile, nonpyrogenic. use only if solution is clear and container is undamaged. must not be used in series connections. rx only 3 v contains dehp im-4420 icu medical, inc., lake forest, illinois, 60045, usa icumedical principal display panel - 1000 ml bag label - im-4420
Principal display panel - 1000 ml bag label - im-4421 40 meq potassium 1000 ml ndc 0990-7904-09 40 meq potassium chloride in 5% dextrose and 0.45% sodium chloride injection, usp each 100 ml contains potassium chloride 298 mg; sodium chloride 450 mg; dextrose, hydrous 5 g in water for injection. may contain hcl for ph adjustment. electrolytes per 1000 ml (not including ions for ph adjustment): potassium 40 meq; sodium 77 meq; chloride 117 meq. 487 mosmol/liter (calc.) ph 4.2 (3.5 to 6.5) additives may be incompatible. consult with pharmacist, if available. when introducing additives, use aseptic technique, mix thoroughly and do not store. single-dose container. for i.v. use. usual dosage: see insert. sterile, nonpyrogenic. use only if solution is clear and container is undamaged. must not be used in series connections. rx only 3 v contains dehp im-4421 icu medical, inc., lake forest, illinois, 60045, usa icumedical principal display panel - 1000 ml bag label - im-4421
Principal display panel - 1000 ml bag label - imp0000057 10 meq potassium 1000 ml ndc 0990-7993-09 10 meq potassium chloride in 5% dextrose and 0.45% sodium chloride injection, usp each 100 ml contains potassium chloride 74.5 mg; sodium chloride 450 mg; dextrose, hydrous 5 g in water for injection. may contain hcl for ph adjustment. electrolytes per 1000 ml (not including ions for ph adjustment): potassium 10 meq; sodium 77 meq; chloride 87 meq. 426 mosmol/liter (calc.) ph 4.2 (3.5 to 6.5) additives may be incompatible. consult with pharmacist, if available. when introducing additives, use aseptic technique, mix thoroughly and do not store. single-dose container. for i.v. use. usual dosage: see insert. sterile, nonpyrogenic. use only if solution is clear and container is undamaged. must not be used in series connections. rx only 3 v contains dehp imp0000057 icu medical, inc. lake forest, illinois, 60045 usa icumedical principal display panel - 1000 ml bag label - imp0000057
Principal display panel - 1000 ml bag label - im-4418 20 meq potassium 1000 ml ndc 0990-7901-09 20 meq potassium chloride in 5% dextrose and 0.225% sodium chloride injection, usp each 100 ml contains potassium chloride 149 mg; sodium chloride 225 mg; dextrose, hydrous 5 g in water for injection. may contain hcl for ph adjustment. electrolytes per 1000 ml (not including ions for ph adjustment): potassium 20 meq; sodium 38.5 meq; chloride 58.5 meq. 370 mosmol/liter (calc.) ph 4.2 (3.5 to 6.5) additives may be incompatible. consult with pharmacist, if available. when introducing additives, use aseptic technique, mix thoroughly and do not store. single-dose container. for i.v. use. usual dosage: see insert. sterile, nonpyrogenic. use only if solution is clear and container is undamaged. must not be used in series connections. ©hospira 2004 im-0057 (4/04) printed in usa hospira, inc., lake forest, il 60045 usa rx only 3 v contains dehp im-4418 icu medical, inc., lake forest, illinois, 60045, usa icumedical principal display panel - 1000 ml bag label - im-4418
Principal display panel - 500 ml bag label - im-4447 10 meq potassium 500 ml ndc 0990-7902-03 10 meq potassium chloride in 5% dextrose and 0.45% sodium chloride inj., usp each 100 ml contains potassium chloride 149 mg; sodium chloride 450 mg; dextrose, hydrous 5 g in water for injection. may contain hcl for ph adjustment. electrolytes per 1000 ml (not including ions for ph adjustment): potassium 20 meq; sodium 77 meq; chloride 97 meq. 447 mosmol/liter (calc.) ph 4.2 (3.5 to 6.5) additives may be incompatible. consult with pharmacist, if available. when introducing additives, use aseptic technique, mix thoroughly and do not store. single-dose container. for i.v. use. usual dosage: see insert. sterile, nonpyrogenic. use only if solution is clear and container is undamaged. must not be used in series connections. rx only 3 v contains dehp icu medical, inc., lake forest, illinois, 60045, usa im-4447 icumedical principal display panel - 500 ml bag label - im-4447
Principal display panel - overwrap to open tear at notch 2 hdpe do not remove from overwrap until ready for use. after removing the overwrap, check for minute leaks by squeezing container firmly. if leaks are found, discard solution as sterility may be impaired. recommended storage: room temperature (25°c). avoid excessive heat. protect from freezing. see insert. 98-4321-r14-3/98 principal display panel - overwrap