Potassium Chloride


Baxter Healthcare Corporation
Human Prescription Drug
NDC 0338-0703
Potassium Chloride is a human prescription drug labeled by 'Baxter Healthcare Corporation'. National Drug Code (NDC) number for Potassium Chloride is 0338-0703. This drug is available in dosage form of Injection, Solution. The names of the active, medicinal ingredients in Potassium Chloride drug includes Potassium Chloride - 29.8 g/1000mL . The currest status of Potassium Chloride drug is Active.

Drug Information:

Drug NDC: 0338-0703
The labeler code and product code segments of the National Drug Code number, separated by a hyphen. Asterisks are no longer used or included within the product code segment to indicate certain configurations of the NDC.
Proprietary Name: Potassium Chloride
Also known as the trade name. It is the name of the product chosen by the labeler.
Product Type: Human Prescription Drug
Indicates the type of product, such as Human Prescription Drug or Human OTC Drug. This data element corresponds to the “Document Type” of the SPL submission for the listing.
Non Proprietary Name: Potassium Chloride
Also known as the generic name, this is usually the active ingredient(s) of the product.
Labeler Name: Baxter Healthcare Corporation
Name of Company corresponding to the labeler code segment of the ProductNDC.
Dosage Form: Injection, Solution
The translation of the DosageForm Code submitted by the firm. There is no standard, but values may include terms like `tablet` or `solution for injection`.The complete list of codes and translations can be found www.fda.gov/edrls under Structured Product Labeling Resources.
Status: Active
FDA does not review and approve unfinished products. Therefore, all products in this file are considered unapproved.
Substance Name:POTASSIUM CHLORIDE - 29.8 g/1000mL
This is the active ingredient list. Each ingredient name is the preferred term of the UNII code submitted.
Route Details:INTRAVENOUS
The translation of the Route Code submitted by the firm, indicating route of administration. The complete list of codes and translations can be found at www.fda.gov/edrls under Structured Product Labeling Resources.

Marketing Information:

An openfda section: An annotation with additional product identifiers, such as NUII and UPC, of the drug product, if available.
Marketing Category: NDA
Product types are broken down into several potential Marketing Categories, such as New Drug Application (NDA), Abbreviated New Drug Application (ANDA), BLA, OTC Monograph, or Unapproved Drug. One and only one Marketing Category may be chosen for a product, not all marketing categories are available to all product types. Currently, only final marketed product categories are included. The complete list of codes and translations can be found at www.fda.gov/edrls under Structured Product Labeling Resources.
Marketing Start Date: 26 Dec, 1989
This is the date that the labeler indicates was the start of its marketing of the drug product.
Marketing End Date: 25 Dec, 2025
This is the date the product will no longer be available on the market. If a product is no longer being manufactured, in most cases, the FDA recommends firms use the expiration date of the last lot produced as the EndMarketingDate, to reflect the potential for drug product to remain available after manufacturing has ceased. Products that are the subject of ongoing manufacturing will not ordinarily have any EndMarketingDate. Products with a value in the EndMarketingDate will be removed from the NDC Directory when the EndMarketingDate is reached.
Application Number: NDA019904
This corresponds to the NDA, ANDA, or BLA number reported by the labeler for products which have the corresponding Marketing Category designated. If the designated Marketing Category is OTC Monograph Final or OTC Monograph Not Final, then the Application number will be the CFR citation corresponding to the appropriate Monograph (e.g. “part 341”). For unapproved drugs, this field will be null.
Listing Expiration Date: 31 Dec, 2023
This is the date when the listing record will expire if not updated or certified by the firm.

OpenFDA Information:

An openfda section: An annotation with additional product identifiers, such as NUII and UPC, of the drug product, if available.
Manufacturer Name:Baxter Healthcare Corporation
Name of manufacturer or company that makes this drug product, corresponding to the labeler code segment of the NDC.
RxCUI:312507
1860239
1860241
1860463
1860466
The RxNorm Concept Unique Identifier. RxCUI is a unique number that describes a semantic concept about the drug product, including its ingredients, strength, and dose forms.
Original Packager:Yes
Whether or not the drug has been repackaged for distribution.
UNII:660YQ98I10
Unique Ingredient Identifier, which is a non-proprietary, free, unique, unambiguous, non-semantic, alphanumeric identifier based on a substance’s molecular structure and/or descriptive information.
Pharmacologic Class:Increased Large Intestinal Motility [PE]
Inhibition Large Intestine Fluid/Electrolyte Absorption [PE]
Osmotic Activity [MoA]
Osmotic Laxative [EPC]
Potassium Compounds [CS]
Potassium Salt [EPC]
These are the reported pharmacological class categories corresponding to the SubstanceNames listed above.

Packaging Information:

Package NDCDescriptionMarketing Start DateMarketing End DateSample Available
0338-0703-4124 BAG in 1 CARTON (0338-0703-41) / 50 mL in 1 BAG26 Dec, 1989N/ANo
0338-0703-4824 BAG in 1 CARTON (0338-0703-48) / 100 mL in 1 BAG26 Dec, 1989N/ANo
Package NDC number, known as the NDC, identifies the labeler, product, and trade package size. The first segment, the labeler code, is assigned by the FDA. Description tells the size and type of packaging in sentence form. Multilevel packages will have the descriptions concatenated together.

Product Elements:

Potassium chloride potassium chloride potassium chloride potassium cation chloride ion water potassium chloride potassium chloride potassium chloride potassium cation chloride ion water potassium chloride potassium chloride potassium chloride potassium cation chloride ion water

Drug Interactions:

Drug interactions other products that cause hyperkalemia administration of potassium chloride injection in patients treated concurrently or recently with other products that can cause hyperkalemia or increase the risk of hyperkalemia (e.g., potassium-sparing diuretics, ace inhibitors, angiotensin ii receptor antagonists, cyclosporine and tacrolimus) increases the risk of severe and potentially fatal hyperkalemia, in particular in the presence of other risk factors for hyperkalemia (see warnings ). avoid use of potassium chloride injection in patients receiving such products. if use cannot be avoided, monitor serum potassium concentrations. other drugs that increase the risk of hyponatremia administration of potassium chloride injection in patients treated concomitantly with drugs associated with hyponatremia may increase the risk of developing hyponatremia (see warnings ). avoid use of potassium chloride injection in patients receiving drugs that may increase the risk of hyponatremia,
such as diuretics and antiepileptics. drugs that increase the vasopressin effect reduce renal electrolyte free water excretion and may also increase the risk of hyponatremia following treatment with intravenous fluids. if use cannot be avoided, monitor serum sodium concentrations.

Indications and Usage:

Indications and usage potassium chloride injection is indicated in the treatment of potassium deficiency states when oral replacement is not feasible. this highly concentrated, ready-to-use potassium chloride injection is intended for the maintenance of serum k + levels and for potassium supplementation in fluid restricted patients who cannot accommodate additional volumes of fluid associated with potassium solutions of lower concentration. when using these products, these patients should be on continuous cardiac monitoring and frequent testing for serum potassium concentration and acid-base balance.

Warnings:

Warnings hyperkalemia this highly concentrated, ready-to-use potassium chloride injection is intended for the maintenance of serum k + levels and for potassium supplementation in fluid restricted patients who cannot accommodate additional volumes of fluid associated with potassium solutions of lower concentration. to avoid potassium intoxication, do not infuse these solutions rapidly. potassium chloride injection should be administered with extreme caution, if at all, to patients with conditions predisposing to hyperkalemia and/or associated with increased sensitivity to potassium, such as patients with: • severe renal impairment, • acute dehydration, • extensive tissue injury or burns, • certain cardiac disorders such as congestive heart failure or av block, • potassium-aggravated skeletal muscle channelopathies (e.g., hyperkalemic periodic paralysis, paramyotonia congenita, and potassium-aggravated myotonia/paramyotonia). potassium chloride injection should b
e administered with caution to patients who are at risk of experiencing hyperosmolality, acidosis, or undergo correction of alkalosis (conditions associated with a shift of potassium from intracellular to extracellular space) and patients treated concurrently or recently with agents or products that can cause hyperkalemia (see precautions , drug interactions ). if used in high-risk patients, especially close monitoring and careful dose selection and adjustment is required. patients requiring highly concentrated solutions should be kept on continuous cardiac monitoring and undergo frequent testing for serum potassium and acid-base balance, especially if they receive digitalis. administration of concentrated potassium solutions can cause cardiac conduction disorders (including complete heart block) and other cardiac arrhythmias at any time during infusion. continuous cardiac monitoring is performed to aid in the detection of cardiac arrhythmias due to a sudden increase in serum potassium concentration (e.g., when potassium infusion is started), or transient or sustained hyperkalemia (see adverse reactions and overdosage ). frequently, mild or moderate hyperkalemia is asymptomatic and may be manifested only by increased serum potassium concentrations and, possibly, characteristic ekg changes. however, fatal arrhythmias can develop at any time during hyperkalemia. serum potassium levels are not necessarily indicative of tissue potassium levels. tissue damage and thrombophlebitis when infusing concentrated potassium solutions, including potassium chloride injection, care must be taken to prevent paravenous administration or extravasation because such solutions may be associated with tissue damage, which may be severe and include vascular, nerve, and tendon damage, leading to surgical intervention, including amputation. secondary complications including pulmonary embolism from thrombophlebitis have been reported as a consequence of tissue damage from potassium chloride. administer intravenously only with a calibrated infusion device at a slow, controlled rate. (see dosage and administration ) . highest concentrations (400 meq per l) should be exclusively administered via central intravenous route. whenever possible, administration via a central route is recommended for all concentrations of potassium chloride injection for thorough dilution by the blood stream and decreasing the risk of extravasation and to avoid pain and phlebitis associated with peripheral infusion. correct placement of the catheter should be verified before administration. hyponatremia monitoring of serum sodium is particularly important for hypotonic fluids. potassium chloride injection has an osmolarity of 200 to 799 mosmol/l (see description ). potassium chloride injection may cause hyponatremia. the risk for hyponatremia is increased, in pediatric patients, elderly patients, postoperative patients, those with psychogenic polydipsia and in patients treated with medications that increase the risk of hyponatremia (such as certain diuretic, antiepileptic and psychotropic medications) (see precautions, drug interactions ). acute hyponatremia can lead to acute hyponatremic encephalopathy characterized by headache, nausea, seizures, lethargy and vomiting. patients with brain edema are at particular risk of severe, irreversible and life-threatening brain injury. avoid potassium chloride injection in patients with or at risk for hyponatremia. if use cannot be avoided, monitor serum sodium concentrations. high volume infusion must be used with close monitoring in patients with cardiac or pulmonary failure, and in patients with non-osmotic vasopression release (including siadh), due to the risk of hospital-acquired hyponatremia. fluid overload depending on the volume and rate of infusion, and the patient’s underlying clinical condition, the intravenous administration of potassium chloride injection can cause electrolyte disturbances such as overhydration/hypervolemia and congested states including central (e.g., pulmonary edema) and peripheral edema. avoid potassium chloride injection in patients with or at risk for fluid and/or solute overloading. if use cannot be avoided, monitor fluid balance, electrolyte concentrations and acid base balance as needed and especially during prolonged use. hyperchloremia in patients with or at risk of hyperchloremia, potassium chloride injection may exacerbate or result in hyperchloremia. monitor plasma chloride levels and renal function in such patients.

General Precautions:

General do not connect flexible plastic containers in series in order to avoid air embolism due to possible residual air contained in the primary container.

Dosage and Administration:

Dosage and administration the dose and rate of administration are dependent upon the specific condition of each patient. administer intravenously only with a calibrated infusion device at a slow, controlled rate. highest concentrations (400 meq/l) should be exclusively administered via central intravenous route. whenever possible, administration via a central route is recommended for all concentrations of potassium chloride injection for thorough dilution by the blood stream and decreasing the risk of extravasation and to avoid pain and phlebitis associated with peripheral infusion (see warnings ). correct placement of the catheter should be verified before administration. recommended administration rates should not usually exceed 10 meq per hour or 200 meq for a 24 hour period if the serum potassium level is greater than 2.5 meq per liter. in urgent cases where the serum potassium level is less than 2.0 meq per liter or where severe hypokalemia is a threat, (serum potassium level less
than 2.0 meq per liter and electrocardiographic changes and/or muscle paralysis) rates up to 40 meq per hour or 400 meq over a 24 hour period can be administered very carefully when guided by continuous monitoring of the ekg and frequent serum k + determinations to avoid hyperkalemia and cardiac arrest. parenteral drug products should be inspected visually for particulate matter and discoloration, whenever solution and container permit. do not administer unless solution is clear and seal is intact. use of a final filter is recommended during administration of all parenteral solutions where possible. do not add supplementary medication.

Contraindications:

Contraindications potassium chloride injection is contraindicated in patients with: • hyperkalemia • known hypersensitivity to potassium chloride injection

Adverse Reactions:

Adverse reactions the following adverse reactions associated with the use of potassium chloride injection were identified in postmarketing reports. because these reactions were reported voluntarily from a population of uncertain size, it is not always possible to estimate their frequency, reliably, or to establish a causal relationship to drug exposure. immune system disorders: hypersensitivity, as manifested by rash and angioedema metabolism and nutrition disorders: hyperkalemia, hyponatremia cardiac disorders: cardiac arrest*, asystole*, ventricular fibrillation*, bradycardia *as a manifestation of rapid intravenous administration and/or of hyperkalemia respiratory, thoracic, and mediastinal disorders: dyspnea general disorders and administration site conditions: chest pain, infusion site thrombosis, infusion site phlebitis, infusion site erythema, infusion site swelling, infusion site pain, infusion site irritation, and/or a burning sensation. nervous system disorders: hyponatremic
encephalopathy the following adverse reactions were reported in association with extravasation: skin necrosis, skin ulcer, soft tissue necrosis, muscle necrosis, nerve injury, tendon injury, and vascular injury.

Drug Interactions:

Drug interactions other products that cause hyperkalemia administration of potassium chloride injection in patients treated concurrently or recently with other products that can cause hyperkalemia or increase the risk of hyperkalemia (e.g., potassium-sparing diuretics, ace inhibitors, angiotensin ii receptor antagonists, cyclosporine and tacrolimus) increases the risk of severe and potentially fatal hyperkalemia, in particular in the presence of other risk factors for hyperkalemia (see warnings ). avoid use of potassium chloride injection in patients receiving such products. if use cannot be avoided, monitor serum potassium concentrations. other drugs that increase the risk of hyponatremia administration of potassium chloride injection in patients treated concomitantly with drugs associated with hyponatremia may increase the risk of developing hyponatremia (see warnings ). avoid use of potassium chloride injection in patients receiving drugs that may increase the risk of hyponatremia,
such as diuretics and antiepileptics. drugs that increase the vasopressin effect reduce renal electrolyte free water excretion and may also increase the risk of hyponatremia following treatment with intravenous fluids. if use cannot be avoided, monitor serum sodium concentrations.

Use in Pregnancy:

Pregnancy there are no adequate, well controlled studies with potassium chloride injection in pregnant women and animal reproduction studies have not been conducted with this drug. therefore, it is not known whether potassium chloride injection can cause fetal harm when administered to a pregnant woman. potassium chloride injection should be given during pregnancy only if potential benefit justifies the potential risk to the fetus.

Pediatric Use:

Pediatric use these products should not be used in children at this time. safety and effectiveness of potassium chloride injection in pediatric patients have not been established by adequate and well-controlled studies.

Overdosage:

Overdosage potassium overdose can cause potentially fatal hyperkalemia. manifestations of hyperkalemia include: • disturbances in cardiac conduction and arrhythmias, including bradycardia, heart block, asystole, ventricular tachycardia, ventricular fibrillation • hypotension • muscle weakness up to and including muscular and respiratory paralysis, paresthesia • gastrointestinal symptoms (ileus, nausea, vomiting, abdominal pain) frequently, mild or moderate hyperkalemia is asymptomatic and may be manifested only by increased serum potassium concentrations and, possibly, characteristic electrocardiographic changes. however, fatal arrhythmias can develop at any time. in addition to arrhythmias and conduction disorders, the ekg shows progressive changes that occur with increasing potassium levels. possible changes include: • peaking of t waves, • loss of p waves, and • qrs widening. however, the correlation between potassium levels and ekg changes is not precise, and whether or at which potassium level certain ekg signs develop depends on factors such as patient sensitivity, the presence of other electrolyte disorders, and the rapidity of the development of hyperkalemia. the presence of any ekg findings that are suspected to be caused by hyperkalemia should be considered a medical emergency. in the event of hyperkalemia, discontinue the infusion immediately and institute close ekg, laboratory and other monitoring and, as necessary, corrective therapy to reduce serum potassium levels as necessary. the use of potassium containing foods or medications must also be eliminated. treatment of mild to severe hyperkalemia with signs and symptoms of potassium intoxication includes the following: 1. dextrose injection, usp, 10% or 25%, containing 10 units of crystalline insulin per 20 grams of dextrose administered intravenously, 300 to 500 ml per hour. 2. absorption and exchange of potassium using sodium or ammonium cycle cation exchange resin, orally and as retention enema. 3. hemodialysis and peritoneal dialysis. in cases of digitalization, too rapid a lowering of plasma potassium concentration can cause digitalis toxicity.

Description:

Description this potassium chloride injection, is a sterile, nonpyrogenic, highly concentrated, ready-to-use, solution of potassium chloride, usp in water for injection, usp for electrolyte replenishment in a single dose container for intravenous administration. it contains no antimicrobial agents. potassium chloride injection meq potassium/container composition (g/l) potassium chloride, usp (kcl) osmolarity normal physiologic osmolarity range is approximately 280 to 310 mosmol/l. administration of substantially hypertonic solutions (≥ 600 mosmol/l) may cause vein damage. (mosmol/l) (calc) ph ionic concentration (meq/l) potassium chloride 10 meq/100 ml 7.46 200 5.0 (4.0 to 8.0) 100 100 10 meq/50 ml 20 meq/100 ml 14.9 400 5.0 (4.0 to 8.0) 200 200 20 meq/50 ml 40 meq/100 ml 29.8 799 5.0 (4.0 to 8.0) 400 400 this viaflex plus plastic container is fabricated from a specially formulated polyvinyl chloride (pl 146 plastic). exposure to temperatures above 25°c/77°f during transport and storage will lead to minor losses in moisture content. higher temperatures lead to greater losses. it is unlikely that these minor losses will lead to clinically significant changes within the expiration period. the amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. solutions in contact with the plastic container may leach out certain of its chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials.

Clinical Pharmacology:

Clinical pharmacology potassium is the major cation of body cells (160 meq/liter of intracellular water) and is concerned with the maintenance of body fluid composition and electrolyte balance. potassium participates in carbohydrate utilization, protein synthesis, and is critical in the regulation of nerve conduction and muscle contraction, particularly in the heart. chloride, the major extracellular anion, closely follows the metabolism of sodium, and changes in the acid-base of the body are reflected by changes in the chloride concentration. normally about 80 to 90% of the potassium intake is excreted in the urine, the remainder in the stools and to a small extent, in the perspiration. the kidney does not conserve potassium well so that during fasting, or in patients on a potassium-free diet, potassium loss from the body continues resulting in potassium depletion. a deficiency of either potassium or chloride will lead to a deficit of the other.

How Supplied:

How supplied potassium chloride injection in viaflex plus plastic containers is available as follows: 2b0826 10 meq/100 ml ndc 0338-0709-48 2b0821 10 meq/50 ml ndc 0338-0705-41 2b0827 20 meq/100 ml ndc 0338-0705-48 2b0822 20 meq/50 ml ndc 0338-0703-41 2b0824 40 meq/100 ml ndc 0338-0703-48 exposure of pharmaceutical products to heat should be minimized. avoid excessive heat. it is recommended that this product be stored at room temperature (25°c).

Package Label Principal Display Panel:

Principal display panel container label container label lot exp ndc 0338-0703-41 highly concentrated (400 meq/l) potassium chloride potassium chloride injection 20 meq per 50 ml 50 ml sterile single dose container each 50 ml contains 1.49 g potassium chloride ph 5 (4 to 8) potassium 400 meq/l chloride 400 meq/l hypertonic 799 mosmol/l (calc) usual dosage see insert use only with a calibrated infusion device use central route whenever possible do not add supplementary medication store in moisture barrier overwrap at room temperature (77°f or 25°c) until ready to use rx only baxter logo usa 2b0822 carton label lot: xxxxxxx exp: xxx xx qty: 24-50 ml code: 2b0822 ndc: 0338-0703-41 potassium chloride injection 20meq per 50ml (17) xxxxx00 (10) xxxxxxx (01) 50303380703413 container label container label lot exp ndc 0338-0705-41 highly concentrated (200 meq/l) potassium chloride potassium chloride injection 10 meq per 50 ml 50 ml sterile single dose container each 50 ml contains 746 mg potassium chloride ph 5 (4 to 8) potassium 200 meq/l chloride 200 meq/l hypertonic 400 mosmol/l (calc) usual dosage see insert use only with a calibrated infusion device use central route whenever possible do not add supplementary medication store in moisture barrier overwrap at room temperature (77°f or 25°c) until ready to use rx only baxter logo usa 2b0821 carton label lot: xxxxxxx exp: xxx xx qty: 24-50 ml code: 2b0821 ndc: 0338-0705-41 potassium chloride injection 10meq per 50 ml (17) xxxxx00 (10) xxxxxxx (01) 50303380705417 container label container label lot exp ndc 0338-0709-48 highly concentrated (100 meq/l) potassium chloride potassium chloride injection 10 meq per 100 ml 100 ml sterile single dose container each 100 ml contains 746 mg potassium chloride ph 5 (4 to 8) potassium 100 meq/l chloride 100 meq/l hypotonic 200 mosmol/l (calc) usual dosage see insert use only with a calibrated infusion device use central route whenever possible do not add supplementary medication store in moisture barrier overwrap at room temperature (77°f or 25°c) until ready to use rx only baxter logo usa 2b0826 carton label lot: xxxxxxx exp: xxx xx qty: 24-100 ml code: 2b0826 ndc: 0338-0709-48 potassium chloride injection 10meq per 100ml (17) xxxxx00 (10) xxxxxxx (01) 50303380709484 potassium chloride injection representative container label ndc 0338-0703-41 potassium chloride injection representative carton label ndc 0338-0703-41 potassium chloride injection representative container label ndc 0338-0705-41 potassium chloride injection representative carton label ndc 0338-0705-41 potassium chloride injection representative container label ndc 0338-0709-48 potassium chloride representative carton label ndc 0338-0709-48


Comments/ Reviews:

* Data of this site is collected from www.fda.gov. This page is for informational purposes only. Always consult your physician with any questions you may have regarding a medical condition.